100w 3d laser deep engraving machine

It is to meet the requirement of deep engraving for metal surface in vehicle, mechanics, electronics, metallurgy, petrol machine

Character

Key components are all imported from overseas, such as acousto-optic, Q-switch, lamp pump etc. Good quality of the system has been assured.Both long purls duration/high average power model and short duration/high peak power model.Based on the same electricity consumption, peak power from the machine is up to 300Kw, which is more than 10 times higher than traditional flash lamp-pumped solid-state lasers.Good beam quality & high energy conversion efficiency.Up to 0.08mm depth during single marking and maximum marking depth is more than 5mm.Pulse frequency control model, repeat frequency is 30KHz.Can be used for metal sheet drilling, minimum aperture width is 0.15mm.Engraving speed: 10 seconds/mm(die steel)Can do 3D engraving

Technical Parameters

Model	CTDB-SD 100W
Laser Power	100W
Laser Wavelength	1064nm
Max laser head Up/Down	50 cm
Frequency	≤50KHz
Standard Marking Area	110mmX110mm
Adjust Marking Area	75mmX75mm /150mmX150mm
Marking Depth	≤5mm(accrording to materals)
Marking Linear Speed	≤7000mm/s
Minimum Linear Width	0.015mm
Minimum Character	0.3mm
Repeat Positioning Acuuracy	±0.01mm
Max Peak power of laser	300 W
Operating Voltage	220V//50Hz/15A
Machinery Packing Size	1100*1000*1200mm
Chiller Packing Size	650*550*950mm

Applicable industries

It is suitable for vehicle parts, hardware, stainless steel materials, watches and clocks, jewelry m industrial bearings, molds and so on.  Especially for deep engraving on copper, aluminum, stainless steel and other metal material surface.

100w 3d laser deep engraving machine